category filters
Oil & Gas Products

Wireless / IoT

Water Management

Industrial Controls

  • We are here to help.

    Our dedicated staff in Boerne, Texas is available to answer questions about Electrolab products and services.

  • For more info, call:

    1 888 301-2400

    Monday-Friday: 7am-4:30pm Central Time

  • Email Us
  • Find a Distributor
  • Support

D99 Extended Warm-Up Node

D99 Extended Warm-Up Node

Categories: Nodes

The Electrolab D99 Extended Warm-Up Node has one analog input using an extended warm-up time to accommodate radar, ultrasonic, and other types of sensors that require an extended warm-up time. The default configuration for the analog input is set to a 29 second warm-up time for compatibility with most 4 to 20 mA sensors. Additional configuration allows for one, 3-wire, 100-Ohm Platinum RTD, one sinking discrete input, two analog inputs and 19 V boost voltage.

Frequency Hopping Spread Spectrum technology and Time Division Multiple Access control ensure reliable data delivery. Transceivers provide bidirectional communication between the Gateway and Node, including fully acknowledged data transmission. Lost RF links are detected and relevant outputs set to user-defined conditions.

Request for Quote

(Please include all of the specifications from the Configuration Options below on your RFQ)

You can easily configure any additional settings for the node on site by manipulating switches inside the node housing.

This node is powered with one lithium battery integrated into the intrinsically safe housing. The D99 housing is certified for use in Class I, Div. 1; Groups A, B, C, and D, Class II, Div. 1, Groups E, F, G; Class III, Zone 0 and Zone 20 when properly installed in accordance with the National Electrical Code and applicable local codes and regulations.